BSI 116 ALUMINUM TUBE IC-GEL 20 GM.

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. Screw on top and cap unit to puncture seal on the tube. Remove cap and apply IC-GEL to one surface, and then hold parts tightly together. Sets in 10-25 seconds. Replace cap immediately after use. Store in cool dry place. Works Best On:

Water-Resistant
Reinforcing
Works Good On:

Balsa Wood
Soft Wood
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Rubber